CAUTION: Be sure you actually lay out the UNITRACK pieces and mark their location on the layout base BEFORE you begin construction of the scenery!!! If you attach the foam inclines to the base without marking the position of the UNITRACK components, you will find the track does NOT match the risers.
This plan is courtesy of Tom Lawson.
Bill of Materials
Optional Items
Leftover straights and curves may be used to extend spur track in lower right hand corner of the layout, bending the spur around the corner and up the side of the layout.
Another #20-203 Right Turnout could be substituted for the #20-150 curve section shown at the entrance of the passing siding, creating the opportunity for an additional spur track in the lower left corner of the layout. This is a highly recommended substitution! It would creatively utilize the “extra” #20-020 straights, #20-160 curves and bumper left over from the original plan design, while also adding more track to your layout.